Changed: Pipewire

hosts/m920q/configuration.nix

@@ -0,0 +1,128 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  # networking.hostName = "nixos"; # Define your hostname.
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+
+  
+
+  # Configure keymap in X11
+  services.xserver.xkb.layout = "de";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+  # services.pipewire = {
+  #   enable = true;
+  #   pulse.enable = true;
+  # };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.phil = {
+     initialPassword = "!P2h3i4lon";
+     isNormalUser = true;
+     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+     packages = with pkgs; [
+       tree
+       neovim
+       git
+       wget
+       curl
+     ];
+   };
+
+  # programs.firefox.enable = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  # environment.systemPackages = with pkgs; [
+  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #   wget
+  # ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.11"; # Did you read the comment?
+
+}
+

hosts/m920q/default.nix

@@ -27,15 +27,11 @@
 
   # Bootloader.
   boot.loader = {
-    grub = {
+    efi = {
-        enable = true;
+      canTouchEfiVariables = true;
-        device = "/dev/sda";
-    };
-    #efi = {
-    #  canTouchEfiVariables = true;
     #  efiSysMountPoint = "/boot/efi"; # ← use the same mount point here.
-    #};
+    };
-    #systemd-boot.enable = true;
+    systemd-boot.enable = true;
   };
 
   networking.hostName = "nix-desktop"; # Define your hostname.

hosts/m920q/hardware-configuration.nix

@@ -5,10 +5,10 @@
 
 {
   imports =
-    [ (modulesPath + "/profiles/qemu-guest.nix")
+    [ (modulesPath + "/installer/scan/not-detected.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "ata_piix" "floppy" "sd_mod" "sr_mod" ];
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ];
   boot.initrd.kernelModules = [ ];
   boot.kernelModules = [ "kvm-intel" ];
   boot.extraModulePackages = [ ];
@@ -31,7 +31,8 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.ens3.useDHCP = lib.mkDefault true;
+  # networking.interfaces.eno1.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
 }

modules/pipewire.nix

@@ -3,14 +3,14 @@
     # Enable sound with pipewire.
     #sound.enable = true;
     hardware.pulseaudio.enable = false;
-    enviroment.systemPackages = with pkgs; [ pamixer ];
+    environment.systemPackages = with pkgs; [ pamixer ];
     services.pipewire = {
           enable = true;
-          alsa.enable = true;
+          #alsa.enable = true;
-          alsa.support32Bit = true;
+          #alsa.support32Bit = true;
-          pulse.enable = true;
+          #pulse.enable = true;
           # If you want to use JACK applications, uncomment this
-          jack.enable = true;
+          #jack.enable = true;
 
           # use the example session manager (no others are packaged yet so this is enabled by default,
           # no need to redefine it in your config for now)